|
|
|
|
|
|
|
|
|
hp photosmart 7350
printer driver
Versatility comes in a compact,
best-profile design with the
hp photosmart 7350 . This amazing photosmart printer provides exceptional results for your home and office printing.
hp photosmart 7350 printer
drivers guide
|
hp photosmart 7350 Printer - Installing the Printer Software
Drivers Guide
NOTE: Download-Drivers.net highly recommends printing this document
hp photosmart 7350 printer drivers install guide for use as a reference
|
In this document:
»
Installing the hp photosmart 7350 printer software driver on a computer that is running Microsoft Windows 98, 2000, Me, or XP and Vista
1. Insert the hp photosmart 7350 printer software
driver CD into the computer CD-ROM drive.
2. Follow the onscreen instructions to install the printer software.
3. When the installation is complete, restart the computer.
4. Print a test page to verify that the printer software is installed correctly and that the printer is communicating with the computer.
Troubleshooting software driver installation issues
ISSUE: The computer could not read the printer software
driver CD.
CAUSE: The issue may be the result of one of the following conditions:
· The CD was not properly inserted into the drive.
· The CD-ROM drive might be damaged.
· The CD might be damaged.
SOLUTION: Follow the troubleshooting steps below until the issue is resolved.
1. Reinsert the CD and try again.
2. Try inserting a CD that is known to work.
3. If that CD does not work, the CD-ROM drive might need service.
4. If other CDs work but the printer software CD does not work, the CD is most likely damaged. Download the printer software from the HP Web site or call the software distribution center. For more information, see the Services and Support booklet that is included with the printer.
ISSUE: The printer software was not installed correctly
CAUSE: The issue might be the result of one of the following conditions:
· A conflict might exist with the computer virus protection program.
· A conflict might exist with another software program.
· A conflict might exist with another peripheral device that is connected to the computer.
SOLUTION: Uninstall and reinstall the printer software.
1. Insert the printer software CD into the computer, click Remove hp photosmart 7350
software and follow the onscreen instructions to uninstall the printer software.
2. Disconnect the printer from the computer by unplugging the USB cable.
3. Restart the computer.
4. Close all applications, including any virus checkers.
5. Connect the printer to the computer by plugging in the USB cable.
6. Follow the onscreen instructions to reinstall the printer software. If issues persist with the software installation, see the Services and Support booklet that is included with the printer.
ISSUE: The printer is connected with a USB printer cable through another USB device or a hub. When printing, the message "There was an error writing to <name of USB port>" appears.
CAUSE: The printer might not be receiving the appropriate data from the other USB device or hub, or two-way communication between the printer and the computer was interrupted by another device that is attached to the hub.
SOLUTION: Disconnect other USB devices from the hub and try printing again. Connect the printer directly to the USB port on the computer.
ISSUE: When connecting a USB printer cable between the printer and the computer, the "Add New Hardware Wizard" message does not appear.
CAUSE: An operating system other than Windows 98, 2000, Me, or XP,vista is being used, or the USB printer cable might not be working or might not be connected properly. Also, the software might have been partially installed, or an earlier version of the software resides on the system.
SOLUTION: Verify that the computer operating system is Windows 98, 2000, Me, or XP,
vista and then follow these steps:
1. Disconnect and reconnect the USB printer cable from the printer.
2. Make sure that the cable is securely attached to both the computer and the printer. If issues persist, try using a different USB port on the computer, or a different USB printer cable.
3. Insert the printer software CD into the computer, click Remove hp photosmart 7350
software, and follow the onscreen instructions to uninstall the printer software.
4. When the uninstall is completed, restart the computer.
5. Follow the onscreen instructions to reinstall the printer software.
ISSUE: When connecting a USB printer cable between the printer and the computer, the "Add New Hardware Wizard" message does not appear.
CAUSE: The USB connection might not be enabled on the computer. To check this:
1. Click Start, click Settings, and then click Control Panel.
2. Double-click the System icon.
3. In Windows 2000 or XP, click the Hardware Profiles tab, and then click Device Manager. In Windows 98 or Me, click the Device Manager tab.
4. Click the Plus (+) sign next to the Universal Serial Bus Controller option. If a USB host controller is present and a USB root hub listed, the USB is enabled. If these devices are not listed, see the computer documentation or contact the computer manufacturer for more information about enabling and setting up USB
ISSUE: When connecting a USB printer cable between the printer and the computer, the "Add New Hardware Wizard" message appeared once, but the printer did not install. The "Add New Hardware Wizard" message does not appear again.
CAUSE: Installation was not completed, it was canceled, or an error occurred.
SOLUTION: Follow these steps:
1. Disconnect the USB printer cable from the computer, and then reconnect it.
2. Insert the printer software CD into the computer, click Remove hp photosmart 7350
driver software and follow the onscreen instructions to uninstall the printer software.
3. When the uninstall is completed, restart the computer.
4. Follow the onscreen instructions to reinstall the printer Driver software .
ISSUE: When connecting a USB printer cable between the printer and the computer, an "Unknown device" message appears.
CAUSE: Static electricity has built up in the USB printer cable between the computer and printer, a defective USB printer cable might be in use, or the software could not identify the new printer.
SOLUTION: Follow these steps:
1. Disconnect the USB printer cable from the printer.
2. Disconnect the power adapter from the power source.
3. Wait approximately 30 seconds.
4. Plug the power adapter into the power source.
5. Plug the USB printer cable into the printer.
6. If "Unknown device" continues to appear in the New Hardware Found dialog
box, then the printer Should be checked by printer repair professional.
Other related hp photosmart 7350 Drivers Download
Faqs
» How do I get download for my hp photosmart 7350
printer driver?
You can get a hp photosmart 7350 printer driver in one of three ways:
|
|
|
» From the CD that came shipped with your printer
If you have the CD and want to install your driver from the CD, click below on your operating system:
hp photosmart 7350 printers drivers Windows Vista
hp photosmart 7350 printers drivers Windows XP
hp photosmart 7350 printers drivers Windows 2000
hp photosmart 7350 printers drivers Window Me
hp photosmart 7350 printers drivers Windows 98
hp photosmart 7350 printers drivers Windows 95
hp photosmart 7350 printers drivers Mac OS X
hp photosmart 7350 printers drivers Mac OS 9
hp photosmart 7350 printers drivers Mac OS 8
» From your Windows CD
For instructions on how to use your Windows CD to install your driver, click below on the version of Windows that you have on
your computer:
Windows Vista
Windows XP
Windows 2000
Window Me
Windows 98
Windows 95
» From Website
» Will I get the same hp photosmart 7350 driver no matter which method I use?
No.
· The drivers on the Hewlett-Packard CD generally provide a semi-automated installation process for your printer
driver. A series of screens appears automatically and you follow directions on each screen to complete the installation.
· The drivers that you install from your Windows CD require that you use Windows’ Add Printer Wizard to complete the
installation.
· The drivers available on Web site are either automatic or manual, depending on which option you choose. These drivers
generally have a semi-automated installation process, but you choose whether you want to download the driver manually or have
the file downloaded and installed automatically. If you choose an automatic download and installation, the driver’s files
will be saved on your Desktop. If you download and install the driver manually, you have to download the driver to a folder
that you create on your own, and then install the driver.
» Why would I use the Windows CD if I have to use the Add Printer Wizard?
If you do not have the CD that came shipped with your printer, and if your printer driver is not available on web site, then
your Windows CD may be the only source for your driver.
» What is a hp photosmart 7350 driver update?
Printer drivers are often updated to fix problems in previous versions and also include new technology that was not available
when the original driver was created. You can download a driver update, if it is specific to your printer model and operating
system, and use the update to replace your current driver.
» How do I know when I should update my hp photosmart 7350
driver?
You can check Web site to see if an update is available for your printer driver
|
|
|
|
|
|
|
